WaveAce 212 60 MHz, 2 Ch, 1 GS/s (Max.), 9 kpts/Ch (18 kpts interleaved) with 5.7" Color Display

Long Capture and Zoom
Small, portable oscilloscopes often suffer from short capture time due to the small waveform memory. The WaveAce is available in 4 kpts/Ch and 9 kpts/Ch configurations which is up 2 to 3 times more than competitive products. More memory results in longer capture times showing more waveform detail with each trigger. Activate the built-in zoom function to take a closer look at the details.

Digital Filter
Digital filtering is available on each channel of the WaveAce. The Low-Pass, High-Pass, Band-Pass and Band-Stop filters allow you to isolate only the frequencies you want to see.

Trigger
Edge triggering is not always the best choice for every signal. Beyond the basic edge trigger is a set of trigger capabilities which include Pulse Width, Video and Slope (Rise Time) triggers.

Automatic Measurements
With 32 standard automatic measurements the WaveAce simplifies how you work. Display up to 4 measurements without crowding the waveform display or show all 32 at once with the measurement dashboard. A wide range of advanced timing parameters provide insight to the relationship between 2 different signals.

Waveform Math
The WaveAce provides five math functions including Add, Subtract, Multiply, Divide and FFT. The FFT capability includes the choices of four windows and two different vertical scales.

Connectivity
The WaveAce provides a USB host port on the front panel for saving screen images, waveforms and setups to a memory stick. A rear panel USB device port allows for connection to a PC or PictBridge printer. Connecting and communicating with a PC is simplified with EasyScope software providing full access to the oscilloscope’s display, measurements, waveform data and front panel controls through USB or RS-232.

Pass/Fail Test
With built-in Pass/Fail Mask testing the WaveAce can quickly identify problems and let you know when they occur. A history of the P/F results can be displayed on the screen.

Waveform Sequence Recorder
Capture and replay a sequence of up to 2500 waveforms to isolate that runt or glitch which is causing problems in your system.

Large Internal Storage
Saving and recalling waveforms and setups from internal memory can save a lot of time during test and debug. The WaveAce can save up to 20 waveforms, 20 setups and 2 reference waveforms to the internal memory.

Acquisition Modes
Different applications call for different acquisitions mode. The WaveAce offers Real Time, Equivalent Time, Peak Detect and Averaging modes to ensure that any waveform can be captured and displayed.

• Bandwidth 60 MHz
• Rise Time 5.8 ns
• Input Channels 2
• Display 5.7" Color, 320 x 240 Resolution
• Sample Rate (single-shot) 1 GS/s (all channels)
• Sample Rate (RIS) 50 GS/s
• Vertical Resolution 8-bits
• Vertical Sensitivity 2 mV/div–5 V/div
• BW Limiting Filters 20 MHz
• Maximum Input Voltage 400 V Pk
• Input Coupling 1 MΩ|| 13 pF
• Input Impedance GND, DC 1 MΩ, AC 1 MΩ
• Probes 10:1, 1:1 Switchable Passive Probe (one per channel)
• Time Base Range 2.5 ns/div–50 s/div
• Memory Length 9 kpts/Ch, (18 kpts interleaved)
• Peak Detect Period 10 ns